The pump noise can be extremely annoying. Sometimes it is whiny, other times screaming and sometimes it is the kind of vibration which shakes the entire place. There are multiple reasons for the pump making noise. But the question is: How to reduce pump noise!
Reasons for The Noise
Although everybody is irritated with the pump noise sometimes there is a good reason for the noise, it indicates the sign of an emerging problem.
Types of Noises
-
Vibrating Noise
This simply means that the motor isn’t properly installed or is not fixed in an area properly.
-
Screaming Noise
This gives us an indication that there might be some trouble with bearings of the motor. In such case, all you need to do is fix the bearings and your problem will be fixed in no time. When the bearings are damaged or rustic, they create such shrills hence either lubricate them or change them completely.
-
Whining Noise
This is caused when the motor is unable to push the liquid into the pump. The lack of water and presence of air causes it to whistle loudly or cause a pitched whine like noise. How to reduce pump noise? Well, installing impellers can do the trick.
-
Shrill Noise
This gives us a signal that the motor requires changing. It has had enough life for now. How to reduce pump noise like this? Well replace your motor with a brand new model and your noise will automatically improve!
How To Reduce Pump Noise?
These are some of the ways you can reduce the pump noise:
-
Installation
It is better to install a motor on a shaft or a rectangular cement slab. Basically, against a hard surface must the motor reside. This allows the motor to be held firmly in the place and the vibrations just disappear in the floor. So how to reduce pump noise? Install it firmly!
-
Covering of The Motor
Another answer to the question: “how to reduce pump noise” is to cover the motor with a heavy cardboard box or a ventilation box or any other covering. This enables the noise to be diminished due to the weight and you can enjoy a relaxing day without any disturbance. The weight absorbs the noise vibrations leaving out just a muffled sound, however, this method doesn’t always work.
-
Lubricate The Pipes or Add Some Accessories
By lubricating, the pumps or adding accessories like rubber acoustic mats can help in reducing the pump noise. Once the pump is lubricated, it will easily function but the rubber acoustics are there to absorb the vibrations. Hence try lubrication after you have used the pump for a while. And if lubrication doesn’t work then try adding the accessories like rubber acoustic mats underneath it to reduce some of its noise.
-
Get A New Motor
If none of the above suggestions don’t work for you, then it is time to upgrade your motor or replace it with a new one!
Hence if your question, “how to reduce pump noise” is answered by above solutions then good, if not then you really need to upgrade!
